Aboulfadl H., Keller J., Larsen J., Riekehr L., Edoff M., Platzer-Björkman C., Microstructural Characterization of Sulfurization Effects in Cu(In,Ga)Se2 Thin Film Solar Cells, Microscopy and Microanalysis, 25 (2019) 532-538.
Aboulfadl H., Mücklich F., Atomic-scale characterization of diffusion kinetics in Ru/Al multilayer thin films, Materials Letters, 254 (2019) 344-347.
Aboulfadl H., Seifried F., Stüber M., Mücklich F., Interdiffusion in as-deposited Ni/Ti multilayer thin films analyzed by atom probe tomography, Materials Letters, 236 (2019) 92-95.
Ahlawat S., Sarkar S.K., Sen D., Biswas A., Revisiting temporal evolution of cu-rich precipitates in Fe-cu alloy: Correlative small angle neutron scattering and atom-probe tomography studies, Microscopy and Microanalysis, 25 (2019) 840-848.
Akhatova A., Christien F., Barnier V., Radiguet B., Cadel E., Cuvilly F., Pareige P., Investigation of the dependence of phosphorus segregation on grain boundary structure in Fe-P-C alloy: сross comparison between Atom Probe Tomography and Auger Electron Spectroscopy, Applied Surface Science, 463 (2019) 203-210.
Almirall N., Wells P.B., Ke H., Edmondson P., Morgan D., Yamamoto T., Odette G.R., On the elevated temperature thermal stability of nanoscale Mn-Ni-Si precipitates formed at lower temperature in highly irradiated reactor pressure vessel steels, Scientific Reports, 9 (2019) .
Almirall N., Wells P.B., Yamamoto T., Wilford K., Williams T., Riddle N., Odette G.R., Precipitation and hardening in irradiated low alloy steels with a wide range of Ni and Mn compositions, Acta Materialia, 179 (2019) 119-128.
An D., Baik S.-I., Pan S., Zhu M., Isheim D., Krakauer B.W., Seidman D.N., Evolution of Microstructure and Carbon Distribution During Heat Treatments of a Dual-Phase Steel: Modeling and Atom-Probe Tomography Experiments, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 436-450.
Antonov S., Chen W., Lu S., Isheim D., Seidman D.N., Feng Q., Sun E., Tin S., The effect of phosphorus on the formation of grain boundary laves phase in high-refractory content Ni-based superalloys, Scripta Materialia, 161 (2019) 44-48.
Antonov S., Isheim D., Seidman D.N., Tin S., Phosphorous behavior and its effect on secondary phase formation in high refractory content powder-processed Ni-based superalloys, Materialia, 7 (2019).
Arkhurst B.M., Seol J.B., Lee Y.S., Lee M., Kim J.H., Interfacial structure and bonding mechanism of AZ31/carbon-fiber-reinforced plastic composites fabricated by thermal laser joining, Composites Part B: Engineering, 167 (2019) 71-82.
Azzam A., Hauet A., Danoix F., Philippe T., Sauvage X., Blavette D., Phase transformations and γ′ phase stability in model CoAlW superalloys, Journal of Alloys and Compounds, 798 (2019) 832-845.
Bacchi C., Da Costa G., Vurpillot F., Spatial and Compositional Biases Introduced by Position Sensitive Detection Systems in APT: A Simulation Approach, Microscopy and Microanalysis, 25 (2019) 418-424.
"
Bachhav M., Pawar G., Vurpillot F., Danoix R., Danoix F., Hannoyer B., Dong Y., Marquis E., Interpreting the Presence of an Additional Oxide Layer in Analysis of Metal Oxides-Metal Interfaces in Atom Probe Tomography, Journal of Physical Chemistry C, 123 (2019) 1313-1319."
Badyka R., Monnet G., Saillet S., Domain C., Pareige C., Quantification of hardening contribution of G-Phase precipitation and spinodal decomposition in aged duplex stainless steel: APT analysis and micro-hardness measurements, Journal of Nuclear Materials, 514 (2019) 266-275.
Bai S., Xu H., Liu Z., Yi X., Zhao J., Wang J., On the role of the solute partitioning and chemistry in initial precipitation of Ω plates, Materials Science and Engineering A, 766 (2019).
Bakhit B., Engberg D.L.J., Lu J., Rosen J., Högberg H., Hultman L., Petrov I., Greene J.E., Greczynski G., Strategy for simultaneously increasing both hardness and toughness in ZrB2-rich Zr1−xTaxBy thin films, Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 37 (2019).
Balachandran S., Orava J., Köhler M., Breen A.J., Kaban I., Raabe D., Herbig M., Elemental re-distribution inside shear bands revealed by correlative atom-probe tomography and electron microscopy in a deformed metallic glass, Scripta Materialia, 168 (2019) 14-18.
Ballor J., Ikeda M., Kautz E.J., Boehlert C.J., Devaraj A., Composition-Dependent Microstructure-Property Relationships of Fe and Al Modified Ti-12Cr (wt.%), JOM, 71 (2019) 2321-2330.
Bantounas I., Gwalani B., Alam T., Banerjee R., Dye D., Elemental partitioning, mechanical and oxidation behaviour of two high-γ ′ W-free γ/γ ′ polycrystalline Co/Ni superalloys, Scripta Materialia, 163 (2019) 44-50.
Barrirero J., Engstler M., Mücklich F., Odén M., Phase selective sample preparation of Al-Si alloys for atom probe tomography [Phasenselektive probenpräparation von al-si-legierungen für die atomsondentomographie], Praktische Metallographie/Practical Metallography, 56 (2019) 76-90.
Barrirero J., Pauly C., Engstler M., Ghanbaja J., Ghafoor N., Li J., Schumacher P., Odén M., Mücklich F., Eutectic modification by ternary compound cluster formation in Al-Si alloys, Scientific Reports, 9 (2019).
Barth T.L., Marquis E.A., The Effect of Ti on the Early Stages of Oxidation of an Alumina-Forming NiCrAl Alloy, Oxidation of Metals, 92 (2019) 13-26.
Barton D.J., Hornbuckle B.C., Darling K.A., Thompson G.B., The Influence of Isoconcentration Surface Selection in Quantitative Outputs from Proximity Histograms, Microscopy and Microanalysis, 25 (2019) 401-409.
Beeri O., Baik S.-I., Bram A.I., Shandalov M., Seidman D.N., Dunand D.C., Effect of U and Th trace additions on the precipitation strengthening of Al–0.09Sc (at.%) alloy, Journal of Materials Science, 54 (2019) 3485-3495.
Behera A.K., Olson G.B., Prediction of Carbon Partitioning and Austenite Stability via Non-equilibrium Thermodynamics in Quench and Partition (Q&P) Steel, JOM, 71 (2019) 1375-1385.
Beinke D., Schmitz G., Atom Probe Reconstruction with a Locally Varying Emitter Shape, Microscopy and Microanalysis, 25 (2019) 280-287.
Benzing J.T., Kwiatkowski da Silva A., Morsdorf L., Bentley J., Ponge D., Dutta A., Han J., McBride J.R., Van Leer B., Gault B., Raabe D., Wittig J.E., Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel, Acta Materialia, 166 (2019) 512-530.
Bhattacharyya D., Yamamoto T., Wells P., Marquis E., Bachhav M., Wu Y., Davis J., Xu A., Odette G.R., Microstructural changes and their effect on hardening in neutron irradiated Fe-Cr alloys, Journal of Nuclear Materials, 519 (2019) 274-286.
Bhattacharyya M., Langelier B., Purdy G.R., Zurob H.S., Effect of Mn and C on Grain Growth in Mn Steels, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 905-914.
Bikmukhametov I., Beladi H., Wang J., Hodgson P.D., Timokhina I., The effect of strain on interphase precipitation characteristics in a Ti-Mo steel, Acta Materialia, 170 (2019) 75-86.
Bloch E.M., Jollands M.C., Gerstl S.S.A., Bouvier A.-S., Plane F., Baumgartner L.P., Diffusion of calcium in forsterite and ultra-high resolution of experimental diffusion profiles in minerals using local electrode atom probe tomography, Geochimica et Cosmochimica Acta, 265 (2019) 85-95.
Bodziak S., Al-Rubaie K.S., Valentina L.D., Lafratta F.H., Santos E.C., Zanatta A.M., Chen Y., Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h, Materials Characterization, 151 (2019) 73-83.
Bolbut V., Seils S., Boll T., Chassaing D., Krüger M., Controversial discussion on the existence of the Hf and Zr monoborides and experimental proof by atom probe tomography, Materialia, 6 (2019).
Bonef B., Harrington S.D., Pennachio D.J., Speck J.S., Palmstrøm C.J., Nanometer scale structural and compositional inhomogeneities of half-Heusler CoTi1-xFexSb thin films, Journal of Applied Physics, 125 (2019).
Bonef B., Shah R.D., Mukherjee K., Fast Diffusion and Segregation along Threading Dislocations in Semiconductor Heterostructures, Nano Letters, 19 (2019) 1428-1436.
Bonvalet M., Sauvage X., Blavette D., Intragranular nucleation of tetrahedral precipitates and discontinuous precipitation in Cu-5wt%Ag, Acta Materialia, 164 (2019) 454-463.
Cao M., Evans N.J., Reddy S.M., Fougerouse D., Hollings P., Saxey D.W., McInnes B.I.A., Cooke D.R., McDonald B.J., Qin K., Micro- A nd nano-scale textural and compositional zonation in plagioclase at the Black Mountain porphyry Cu deposit: Implications for magmatic processes, American Mineralogist, 104 (2019) 391-402.
Cautaerts N., Delville R., Stergar E., Schryvers D., Verwerft M., Characterization of (Ti,Mo,Cr)C nanoprecipitates in an austenitic stainless steel on the atomic scale, Acta Materialia, 164 (2019) 90-98.
Ceguerra A.V., Day A.C., Ringer S.P., Assessing the Spatial Accuracy of the Reconstruction in Atom Probe Tomography and a New Calibratable Adaptive Reconstruction, Microscopy and Microanalysis, 25 (2019) 309-319.
Ceguerra A.V., Marceau R.K.W., Atom probe tomography of aluminium alloys: A systematic meta-analysis review of 2018, Metals, 9 (2019).
Chang Y., Lu W., Guénolé J., Stephenson L.T., Szczpaniak A., Kontis P., Ackerman A.K., Dear F.F., Mouton I., Zhong X., Zhang S., Dye D., Liebscher C.H., Ponge D., Korte-Kerzel S., Raabe D., Gault B., Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials, Nature Communications, 10 (2019).
Chang Y.H., Mouton I., Stephenson L., Ashton M., Zhang G.K., Szczpaniak A., Lu W.J., Ponge D., Raabe D., Gault B., Quantification of solute deuterium in titanium deuteride by atom probe tomography with both laser pulsing and high-voltage pulsing: Influence of the surface electric field, New Journal of Physics, 21 (2019).
Chaouadi R., Gérard R., Stergar E., Van Renterghem W., Neutron irradiation hardening of chemically-tailored RPV steels with respect to Cu/P and Ni/Mn elements, Journal of Nuclear Materials, 519 (2019) 188-204.
Chellali M.R., Sarkar A., Nandam S.H., Bhattacharya S.S., Breitung B., Hahn H., Velasco L., On the homogeneity of high entropy oxides: An investigation at the atomic scale, Scripta Materialia, 166 (2019) 58-63.
Chen H., Kauffmann A., Seils S., Boll T., Liebscher C.H., Harding I., Kumar K.S., Szabó D.V., Schlabach S., Kauffmann-Weiss S., Müller F., Gorr B., Christ H.-J., Heilmaier M., Crystallographic ordering in a series of Al-containing refractory high entropy alloys Ta–Nb–Mo–Cr–Ti–Al, Acta Materialia, 176 (2019) 123-133.
Chen H., Wang Y., Yao Y., Qu J., Yun F., Li Y., Ringer S.P., Yue M., Zheng R., Attractive-domain-wall-pinning controlled Sm-Co magnets overcome the coercivity-remanence trade-off, Acta Materialia, 164 (2019) 196-206.
Chen L., Li Z., Liu L., Sekimura N., Soneda N., Study of the effect of Ni on solute clustering in α-Fe, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 453 (2019) 28-31.
Chen S., Miyahara Y., Nomoto A., Nishida K., Effects of thermal aging and low-fluence neutron irradiation on the mechanical property and microstructure of ferrite in cast austenitic stainless steels, Acta Materialia, 179 (2019) 61-69.
Chen S.Y., Tong Y., Tseng K.-K., Yeh J.-W., Poplawsky J.D., Wen J.G., Gao M.C., Kim G., Chen W., Ren Y., Feng R., Li W.D., Liaw P.K., Phase transformations of HfNbTaTiZr high-entropy alloy at intermediate temperatures, Scripta Materialia, 158 (2019) 50-56.
Cheng S., Langelier B., Ra Y.-H., Rashid R.T., Mi Z., Botton G.A., Structural origin of the high-performance light-emitting InGaN/AlGaN quantum disks, Nanoscale, 11 (2019) 8994-8999.
Cheng Y., Cojocaru-Mirédin O., Keutgen J., Yu Y., Küpers M., Schumacher M., Golub P., Raty J.-Y., Dronskowski R., Wuttig M., Understanding the Structure and Properties of Sesqui-Chalcogenides (i.e., V2VI3 or Pn2Ch3 (Pn = Pnictogen, Ch = Chalcogen) Compounds) from a Bonding Perspective, Advanced Materials, 31 (2019).
Choi S., Yun B.-N., Jung W.D., Kim T.H., Chung K.-Y., Son J.-W., Sang B.-I., Jung H.-G., Kim H., Tomographical analysis of electrochemical lithiation and delithiation of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathodes in all-solid-state batteries, Scripta Materialia, 165 (2019) 10-14.
Cockeram B.V., Edmondson P.D., Leonard K.J., Kammenzind B.F., Hollenbeck J.L., Atom probe examinations of Zircaloy irradiated at nominally 358 °C, Nuclear Materials and Energy, 19 (2019) 416-432.
Cojocaru-Mirédin O., Hollermann H., Mio A.M., Wang A.Y.-T., Wuttig M., Role of grain boundaries in Ge-Sb-Te based chalcogenide superlattices, Journal of Physics Condensed Matter, 31 (2019).
Cramer R.C., English J., Bonef B., Speck J.S., BBr3 as a boron source in plasma-assisted molecular beam epitaxy, Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 37 (2019).
Cuevas F.G., Lozano-Perez S., Aranda R.M., Ternero F., Crystallisation of amorphous Al-Y-Ni-(Cu) alloys, Journal of Non-Crystalline Solids, 512 (2019) 15-24.
Cukjati J.T., Cooper R.F., Parman S.W., Zhao N., Akey A.J., Laiginhas F.A.T.P., Differences in chemical thickness of grain and phase boundaries: an atom probe tomography study of experimentally deformed wehrlite, Physics and Chemistry of Minerals, 46 (2019) 845-859.
Day A.C., Ceguerra A.V., Ringer S.P., Introducing a Crystallography-Mediated Reconstruction (CMR) Approach to Atom Probe Tomography, Microscopy and Microanalysis, 25 (2019) 288-300.
De Luca A., Seidman D.N., Dunand D.C., Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys, Acta Materialia, 165 (2019) 1-14.
Demoulin R., Roussel M., Duguay S., Muller D., Mathiot D., Pareige P., Talbot E., Atomic-Scale Characterization of N-Doped Si Nanocrystals Embedded in SiO2 by Atom Probe Tomography, Journal of Physical Chemistry C, 123 (2019) 7381-7389.
Demoulin R., Roussel M., Duguay S., Muller D., Mathiot D., Pareige P., Talbot E., Atomic-Scale Characterization of N-Doped Si Nanocrystals Embedded in SiO 2 by Atom Probe Tomography, Journal of Physical Chemistry C, (2019).
Devaraj A., Wang W., Vemuri R., Kovarik L., Jiang X., Bowden M., Trelewicz J.R., Mathaudhu S., Rohatgi A., Grain boundary segregation and intermetallic precipitation in coarsening resistant nanocrystalline aluminum alloys, Acta Materialia, 165 (2019) 698-708.
Di Russo E., Cherkashin N., Korytov M., Nikolaev A.E., Sakharov A.V., Tsatsulnikov A.F., Bonef B., Blum I., Houard J., Da Costa G., Blavette D., Rigutti L., Compositional accuracy in atom probe tomography analyses performed on III-N light emitting diodes, Journal of Applied Physics, 126 (2019).
Diallo L., Lechevallier L., Fnidiki A., Juraszek J., Viret M., Declémy A., Characterization of nanostructure in low dose Fe-implanted p-type 6H-SiC using atom probe tomography, Journal of Magnetism and Magnetic Materials, 481 (2019) 189-193.
Diao H., Ma D., Feng R., Liu T., Pu C., Zhang C., Guo W., Poplawsky J.D., Gao Y., Liaw P.K., Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility, Materials Science and Engineering A, 742 (2019) 636-647.
Ding L., Orekhov A., Weng Y., Jia Z., Idrissi H., Schryvers D., Muraishi S., Hao L., Liu Q., Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography, Journal of Materials Science, 54 (2019) 7943-7952.
Dong S., Iwata Y., Yaokawa J., Hibi K., Oh-Ishi K., Effect of alloying element on Si phase precipitation from Si-supersaturated ¡-Al solid solution in JIS ADC12 alloy die castings during heat treatment, Materials Transactions, 60 (2019) 1989-1995.
Dong X.X., Shen Y.F., Yin T.W., Misra R.D.K., Lin G., Strengthening a medium-carbon steel to 2800 MPa by tailoring nanosized precipitates and the phase ratio, Materials Science and Engineering A, 759 (2019) 725-735.
Dong Y., Etienne A., Frolov A., Fedotova S., Fujii K., Fukuya K., Hatzoglou C., Kuleshova E., Lindgren K., London A., Lopez A., Lozano-Perez S., Miyahara Y., Nagai Y., Nishida K., Radiguet B., Schreiber D.K., Soneda N., Toyama T., Wang J., Sefta F., Chou P., Marquis E.A., Atom Probe Tomography Interlaboratory Study on Clustering Analysis in Experimental Data Using the Maximum Separation Distance Approach, Microscopy and Microanalysis, 25 (2019) 356-366.
Donthula H., Vishwanadh B., Alam T., Borkar T., Contieri R.J., Caram R., Banerjee R., Tewari R., Dey G.K., Banerjee S., Morphological evolution of transformation products and eutectoid transformation(s) in a hyper-eutectoid Ti-12 at% Cu alloy, Acta Materialia, 168 (2019) 63-75.
Dorin T., Ramajayam M., Babaniaris S., Jiang L., Langan T.J., Precipitation sequence in Al–Mg–Si–Sc–Zr alloys during isochronal aging, Materialia, 8 (2019).
Dorin T., Ramajayam M., Babaniaris S., Langan T.J., Micro-segregation and precipitates in as-solidified Al-Sc-Zr-(Mg)-(Si)-(Cu) alloys, Materials Characterization, 154 (2019) 353-362.
Drouven C., Song W., Bleck W., Phase-Specific Precipitation of Intermetallic Phases in Fe Al Mn Ni C Duplex Steels, Steel Research International, 90 (2019).
Du Y., Li L., Pureza J.M., Chung Y.-W., Pradeep K.G., Sen S., Schneider J., Thermal stability of nanocrystalline grains in Cu-W films, Surface and Coatings Technology, 357 (2019) 662-668.
Dubosq R., Rogowitz A., Schweinar K., Gault B., Schneider D.A., A 2D and 3D nanostructural study of naturally deformed pyrite: assessing the links between trace element mobility and defect structures, Contributions to Mineralogy and Petrology, 174 (2019).
Duchaussoy A., Sauvage X., Edalati K., Horita Z., Renou G., Deschamps A., De Geuser F., Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles, Acta Materialia, 167 (2019) 89-102.
Duguay S., Echeverri A., Castro C., Latry O., Evidence of Mg Segregation to Threading Dislocation in Normally-Off GaN-HEMT, IEEE Transactions on Nanotechnology, 18 (2019) 995-998.
Dumas P., Duguay S., Borrel J., Gauthier A., Ghegin E., Blavette D., 3D atomic-scale investigation of carbon segregation in phosphorus co-implanted silicon, Applied Physics Letters, 115 (2019).
Eder K., Otter L.M., Yang L., Jacob D.E., Cairney J.M., Overcoming Challenges Associated with the Analysis of Nacre by Atom Probe Tomography, Geostandards and Geoanalytical Research, 43 (2019) 385-395.
El Azhari I., Barrirero J., García J., Soldera F., Llanes L., Mücklich F., Atom Probe Tomography investigations on grain boundary segregation in polycrystalline Ti(C,N) and Zr(C,N) CVD coatings, Scripta Materialia, 162 (2019) 335-340.
El-Atwani O., Li N., Li M., Devaraj A., Baldwin J.K.S., Schneider M.M., Sobieraj D., Wróbel J.S., Nguyen-Manh D., Maloy S.A., Martinez E., Outstanding radiation resistance of tungsten-based high-entropy alloys, Science Advances, 5 (2019).
Engberg D.L.J., Tengdelius L., Högberg H., Thuvander M., Hultman L., Atom probe tomography field evaporation characteristics and compositional corrections of ZrB2, Materials Characterization, 156 (2019).
Engler O., Marioara C.D., Aruga Y., Kozuka M., Myhr O.R., Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al–Mg–Si alloy AA 6016, Materials Science and Engineering A, 759 (2019) 520-529.
Erdely P., Staron P., Stark A., Klein T., Clemens H., Mayer S., In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution, Acta Materialia, 164 (2019) 110-121.
Escobar J.D., Faria G.A., Maia E.L., Oliveira J.P., Boll T., Seils S., Mei P.R., Ramirez A.J., Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr – 6 Ni – 2 Mo super martensitic stainless steel: Thermodynamics versus experimental assessments, Acta Materialia, 174 (2019) 246-259.
Fedorova I., Grumsen F.B., Hald J., Andrén H.-O., Liu F., Analyzing Boron in 9-12% Chromium Steels Using Atom Probe Tomography, Microscopy and Microanalysis, 25 (2019) 462-469.
Feng Z., Luo X., Chen Y., Chen N., Wu G., Surface severe plastic deformation induced solute and precipitate redistribution in an Al-Cu-Mg alloy, Journal of Alloys and Compounds, 773 (2019) 585-596.
Fletcher C., Moody M.P., Haley D., Fast modelling of field evaporation in atom probe tomography using level set methods, Journal of Physics D: Applied Physics, 52 (2019).
Forghani F., Han J.C., Moon J., Abbaschian R., Park C.G., Kim H.S., Nili-Ahmadabadi M., On the control of structural/compositional ratio of coherent order-disorder interfaces, Journal of Alloys and Compounds, 777 (2019) 1222-1233.
Forghani F., Moon J., Han J.C., Rahimi R., Abbaschian R., Park C.G., Kim H.S., Nili-Ahmadabadi M., Diffuse γ/γ′ interfaces in the hierarchical dual-phase nanostructure of a Ni-Al-Ti alloy, Materials Characterization, 153 (2019) 284-293.
Fougerouse D., Reddy S.M., Kirkland C.L., Saxey D.W., Rickard W.D., Hough R.M., Time-resolved, defect-hosted, trace element mobility in deformed Witwatersrand pyrite, Geoscience Frontiers, 10 (2019) 55-63.
Francis E., Babu R.P., Harte A., Martin T.L., Frankel P., Jädernäs D., Romero J., Hallstadius L., Bagot P.A.J., Moody M.P., Preuss M., Effect of Nb and Fe on damage evolution in a Zr-alloy during proton and neutron irradiation, Acta Materialia, 165 (2019) 603-614.
"Fu Z., Hoffman A., MacDonald B.E., Jiang Z., Chen W., Arivu M., Wen H., Lavernia E.J., Atom probe tomography study of an Fe25Ni25Co25Ti15Al10 high-entropy alloy fabricated by powder metallurgy, Acta Materialia, 179 (2019) 372-382.
Gómez-Ferrer, B., Heintze, C. and Pareige, C., On the role of Ni, Si and P on the nanostructural evolution of FeCr alloys under irradiation, Journal of Nuclear Materials, 517 (2019) 35-44."
Gao W., Wang X., Chen J., Ban C., Cui J., Lu Z., Influence of deep cryogenic treatment on microstructure and properties of 7A99 ultra-high strength aluminum alloy, Metals, 9 (2019).
Garbrecht M., McCarroll I., Yang L., Bhatia V., Biswas B., Rao D., Cairney J.M., Saha B., Thermally stable epitaxial ZrN/carrier-compensated Sc0.99Mg0.01N metal/semiconductor multilayers for thermionic energy conversion, Journal of Materials Science, (2019).
Gardner H., Pedrazzini S., Douglas J.O., De Lille D., Moody M.P., Bagot P.A.J., Atom Probe Tomography Investigations of Microstructural Evolution in an Aged Nickel Superalloy for Exhaust Applications, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 1862-1872.
Ge R., Wilde S.A., Nemchin A.A., Whitehouse M.J., Bellucci J.J., Erickson T.M., Mechanisms and consequences of intra-crystalline enrichment of ancient radiogenic Pb in detrital Hadean zircons from the Jack Hills, Western Australia, Earth and Planetary Science Letters, 517 (2019) 38-49.
Getto E., Baker B., Tobie B., Briggs S., Hattar K., Knipling K., Effect of friction stir welding and self-ion irradiation on dispersoid evolution in oxide dispersion strengthened steel MA956 up to 25 dpa, Journal of Nuclear Materials, 515 (2019) 407-419.
Ghamarian I., Marquis E.A., Hierarchical density-based cluster analysis framework for atom probe tomography data, Ultramicroscopy, 200 (2019) 28-38.
Glöckel F., Uggowitzer P.J., Felfer P., Pogatscher S., Höppel H.W., Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys, Materials, 12 (2019).
Gómez-Ferrer B., Heintze C., Pareige C., On the role of Ni, Si and P on the nanostructural evolution of FeCr alloys under irradiation, Journal of Nuclear Materials, 517 (2019) 35-44.
Gopon P., Douglas J.O., Auger M.A., Hansen L., Wade J., Cline J.S., Robb L.J., Moody M.P., A nanoscale investigation of Carlin-type gold deposits: An atom-scale elemental and isotopic perspective, Economic Geology, 114 (2019) 1123-1133.
Goulas C., Kumar A., Mecozzi M.-G., Castro-Cerda F.M., Herbig M., Petrov R.H., Sietsma J., Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel, Materials Characterization, 152 (2019) 67-75.
Gouné M., Aoued S., Danoix F., Geandier G., Poulon-Quintin A., Hell J.C., Soler M., Allain S.Y.P., Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C-Mn-Si alloy, Scripta Materialia, 162 (2019) 181-184.
Gramlich A.R.M., Auger M.A., Schneider A., Moody M.P., Atom Probe Tomography of Carbides in Fe-Cr-(W)-C Steels, Steel Research International, 90 (2019).
Gross C.T., Isheim D., Vaynman S., Fine M.E., Chung Y.-W., Design and Development of Lightly Alloyed Ferritic Fire-Resistant Structural Steels, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 209-219.
Gu J., Li J., Chang R., Li L., Comprehensive effect of nitrogen on Cr-Mo-V hot-working die steel with enhanced strength and toughness, Materials Science and Engineering A, 766 (2019).
Gu X.-F., Furuhara T., Chen L., Yang P., Solute Clusters/Enrichment at the Early Stage of Ageing in Mg–Zn–Gd Alloys Studied by Atom Probe Tomography, Acta Metallurgica Sinica (English Letters), 32 (2019) 187-193.
Guo M.X., Li G.J., Zhang Y.D., Sha G., Zhang J.S., Zhuang L.Z., Lavernia E.J., Influence of Zn on the distribution and composition of heterogeneous solute-rich features in peak aged Al-Mg-Si-Cu alloys, Scripta Materialia, 159 (2019) 5-8.
Guo M.X., Zhang Y.D., Li G.J., Jin S.B., Sha G., Zhang J.S., Zhuang L.Z., Lavernia E.J., Solute clustering in Al-Mg-Si-Cu-(Zn) alloys during aging, Journal of Alloys and Compounds, 774 (2019) 347-363.
Guo X., Xiao Z., Qiu W., Li Z., Zhao Z., Wang X., Jiang Y., Microstructure and properties of Cu-Cr-Nb alloy with high strength, high electrical conductivity and good softening resistance performance at elevated temperature, Materials Science and Engineering A, 749 (2019) 281-290.
Guo X.H., Zhang Y.D., Jin S.B., Hu R., Liu Z.W., Zhang R.Q., Sha G., Segregation and precipitation at grain boundaries of weathering steels without/with Sb addition, Materials Chemistry and Physics, 236 (2019).
Guo Y., Liang Y.-J., Lu W., Jia L., Li Z., Peng H., Zhang H., Competitive growth of nano-lamellae Nb/Nb3Si eutectics with enhanced hardness and toughness, Applied Surface Science, 486 (2019) 22-27.
Gwalani B., Gorsse S., Soni V., Carl M., Ley N., Smith J., Ayyagari A.V., Zheng Y., Young M., Mishra R.S., Banerjee R., Role of copper on L1 2 precipitation strengthened fcc based high entropy alloy, Materialia, 6 (2019).
Gwalani B., Pohan R.M., Waseem O.A., Alam T., Hong S.H., Ryu H.J., Banerjee R., Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3, Scripta Materialia, 162 (2019) 477-481.
Gwalani B., Salloom R., Alam T., Valentin S.G., Zhou X., Thompson G., Srinivasan S.G., Banerjee R., Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys, Materials Research Letters, 7 (2019) 267-274.
Hakkarainen T., Rizzo Piton M., Fiordaliso E.M., Leshchenko E.D., Koelling S., Bettini J., Vinicius Avanço Galeti H., Koivusalo E., Gobato Y.G., De Giovanni Rodrigues A., Lupo D., Koenraad P.M., Leite E.R., Dubrovskii V.G., Guina M., Te incorporation and activation as n-type dopant in self-catalyzed GaAs nanowires, Physical Review Materials, 3 (2019).
Haley D., Bagot P.A.J., Moody M.P., DF-Fit: A Robust Algorithm for Detection of Crystallographic Information in Atom Probe Tomography Data, Microscopy and Microanalysis, 25 (2019) 331-337.
Haley D., McCarroll I., Bagot P.A.J., Cairney J.M., Moody M.P., A Gas-Phase Reaction Cell for Modern Atom Probe Systems, Microscopy and Microanalysis, 25 (2019) 410-417.
Halpin J.E., Webster R.W.H., Gardner H., Moody M.P., Bagot P.A.J., MacLaren D.A., An in-situ approach for preparing atom probe tomography specimens by xenon plasma-focussed ion beam, Ultramicroscopy, 202 (2019) 121-127.
Hang L., Xu Z.-Y., Hang W., Huang B.-L., Recent Technical and Application Development of Atomic Spectrometry in China , Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, 39 (2019) 1329-1339.
Hans M., Schneider J.M., On the chemical composition of TiAlN thin films - Comparison of ion beam analysis and laser-assisted atom probe tomography with varying laser pulse energy, Thin Solid Films, 688 (2019).
Hardie C.D., London A.J., Lim J.J.H., Bamber R., Tadić T., Vukšić M., Fazinić S., Exploitation of thermal gradients for investigation of irradiation temperature effects with charged particles, Scientific Reports, 9 (2019).
Harding I., Mouton I., Gault B., Raabe D., Kumar K.S., Carbon partitioning and microstructure evolution during tempering of an Fe-Ni-C steel, Scripta Materialia, 172 (2019) 38-42.
Hatzoglou C., Da Costa G., Vurpillot F., Enhanced dynamic reconstruction for atom probe tomography, Ultramicroscopy, 197 (2019) 72-82.
Hatzoglou C., Radiguet B., Da Costa G., Pareige P., Roussel M., Hernandez-Mayoral M., Pareige C., Quantification of APT physical limitations on chemical composition of precipitates in Fe–Cr alloys, Journal of Nuclear Materials, 522 (2019) 64-73.
Haubrich J., Gussone J., Barriobero-Vila P., Kürnsteiner P., Jägle E.A., Raabe D., Schell N., Requena G., The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V, Acta Materialia, 167 (2019) 136-148.
He F., Chen D., Han B., Wu Q., Wang Z., Wei S., Wei D., Wang J., Liu C.T., Kai J.-J., Design of D0 22 superlattice with superior strengthening effect in high entropy alloys, Acta Materialia, 167 (2019) 275-286.
Hernández-Saz J., Herrera M., Pizarro J., Gonzalez M., Abell J., Walters R., Galindo P.L., Duguay S., Molina S.I., Effect of the thermal annealing and the nominal composition in the elemental distribution of InxAl1-xAsySb1-y for triple junction solar cells, Journal of Alloys and Compounds, 792 (2019) 1021-1027.
Hoffman A., Wen H., Islamgaliev R., Valiev R., High-pressure torsion assisted segregation and precipitation in a Fe-18Cr-8Ni austenitic stainless steel, Materials Letters, 243 (2019) 116-119.
Hong K.-H., Seol J.B., Kim J.H., First principles determination of formation of a Cr shell on the interface between Y–Ti–O nanoparticles and a ferritic steel matrix, Applied Surface Science, 481 (2019) 69-74.
Honour V.C., Holness M.B., Charlier B., Piazolo S.C., Namur O., Prosa T.J., Martin I., Helz R.T., Maclennan J., Jean M.M., Compositional boundary layers trigger liquid unmixing in a basaltic crystal mush, Nature Communications, 10 (2019).
Horky J., Ghaffar A., Werbach K., Mingler B., Pogatscher S., Schäublin R., Setman D., Uggowitzer P.J., Löffler J.F., Zehetbauer M.J., Exceptional strengthening of biodegradable Mg-Zn-Ca alloys through high pressure torsion and subsequent heat treatment, Materials, 12 (2019).
Hou S., Zhang D., Ding Q., Zhang J., Zhuang L., Solute clustering and precipitation of Al-5.1Mg-0.15Cu-xZn alloy, Materials Science and Engineering A, 759 (2019) 465-478.
Hu J., Aarholt T., Setiadinata B., Li K., Garner A., Lozano-Perez S., Moody M., Frankel P., Preuss M., Grovenor C., A multi-technique study of “barrier layer” nano-porosity in Zr oxides during corrosion and hydrogen pickup using (S)TEM, TKD, APT and NanoSIMS, Corrosion Science, 158 (2019).
Huang D., Yan J., Zuo X., Co-precipitation kinetics, microstructural evolution and interfacial segregation in multicomponent nano-precipitated steels, Materials Characterization, 155 (2019).
Huang W., Srot V., Wagner J., Richter G., Fabrication of α-FeSi2 nanowhiskers and nanoblades via electron beam physical vapor deposition, Materials and Design, 182 (2019).
Huang Y., Mao Z., Noebe R.D., Seidman D.N., Effects of tungsten and rhenium additions on phase-separation in a model Ni-Al-Cr-W-Re superalloy: A four-dimensional study, Journal of Alloys and Compounds, 799 (2019) 377-388.
Hyun J.Y., Bae S., Nam Y.C., Kang D., Lee S.-W., Kim D., Park J., Kang Y., Lee H.-S., Surface passivation of Boron Emitters on n-Type silicon solar cells, Sustainability (Switzerland), 11 (2019).
Ioannidou C., Arechabaleta Z., Navarro-López A., Rijkenberg A., Dalgliesh R.M., Kölling S., Bliznuk V., Pappas C., Sietsma J., van Well A.A., Offerman S.E., Interaction of precipitation with austenite-to-ferrite phase transformation in vanadium micro-alloyed steels, Acta Materialia, 181 (2019) 10-24.
Jha R., Diercks D.R., Chakraborti N., Stebner A.P., Ciobanu C.V., Interfacial energy of copper clusters in Fe-Si-B-Nb-Cu alloys, Scripta Materialia, 162 (2019) 331-334.
Jiang K., Back S., Akey A.J., Xia C., Hu Y., Liang W., Schaak D., Stavitski E., Nørskov J.K., Siahrostami S., Wang H., Highly selective oxygen reduction to hydrogen peroxide on transition metal single atom coordination, Nature Communications, 10 (2019).
Jiang L., Marceau R.K.W., Guan B., Dorin T., Wood K., Hodgson P.D., Stanford N., The effect of molybdenum on clustering and precipitation behaviour of strip-cast steels containing niobium, Materialia, 8 (2019).
Jodi D.E., Park N., On the precipitate behavior of aging-treated Fe75(CoCrMnNi)25 and Fe71.25(CoCrMnNi)23.75Cu3Al2 medium-entropy alloys, Materials Letters, 256 (2019).
Jung C., Kang K., Marshal A., Pradeep K.G., Seol J.-B., Lee H.M., Choi P.-P., Effects of phase composition and elemental partitioning on soft magnetic properties of AlFeCoCrMn high entropy alloys, Acta Materialia, 171 (2019) 31-39.
Kannan R., Wang Y., Poplawsky J., Babu S.S., Li L., Cascading phase transformations in high carbon steel resulting in the formation of inverse bainite: An atomic scale investigation, Scientific Reports, 9 (2019).
Karati A., Nagini M., Ghosh S., Shabadi R., Pradeep K.G., Mallik R.C., Murty B.S., Varadaraju U.V., Ti 2 NiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications, Scientific Reports, 9 (2019).
Karlsson D., Marshal A., Johansson F., Schuisky M., Sahlberg M., Schneider J.M., Jansson U., Elemental segregation in an AlCoCrFeNi high-entropy alloy – A comparison between selective laser melting and induction melting, Journal of Alloys and Compounds, 784 (2019) 195-203.
Kauffmann-Weiss S., Iida K., Tarantini C., Boll T., Schneider R., Ohmura T., Matsumoto T., Hatano T., Langer M., Meyer S., Jaroszynski J., Gerthsen D., Ikuta H., Holzapfel B., Hänisch J., Microscopic origin of highly enhanced current carrying capabilities of thin NdFeAs(O,F) films, Nanoscale Advances, 1 (2019) 3036-3048.
Kautz E., Burkes D., Joshi V., Lavender C., Devaraj A., Nanoscale Spatially Resolved Mapping of Uranium Enrichment, Scientific Reports, 9 (2019).
Kilmametov A., Kulagin R., Mazilkin A., Seils S., Boll T., Heilmaier M., Hahn H., High-pressure torsion driven mechanical alloying of CoCrFeMnNi high entropy alloy, Scripta Materialia, 158 (2019) 29-33.
Kim C.W., Terner M., Lee J.H., Hong H.U., Moon J., Park S.J., Jang J.H., Lee C.H., Lee B.H., Lee Y.J., Partitioning of C into κ-carbides by Si addition and its effect on the initial deformation mechanism of Fe-Mn-Al-C lightweight steels, Journal of Alloys and Compounds, 775 (2019) 554-564.
Kim J.-S., Ahn J.-P., Kim Y.-H., Seo K.W., Zadeh H., Kim S.-H., Atomic layout of an orthodontic titanium mini-implant in human tissue: Insights into the possible mechanisms during osseointegration, Angle Orthodontist, 89 (2019) 292-298.
Kim K., Jeong I., Cho Y., Shin D., Song S., Ahn S.K., Eo Y.-J., Cho A., Jung C., Jo W., Kim J.H., Choi P.-P., Gwak J., Yun J.H., Mechanisms of extrinsic alkali incorporation in CIGS solar cells on flexible polyimide elucidated by nanoscale and quantitative analyses, Nano Energy, (2019).
Kim K., Kim J., Gang M.G., Kim S.-H., Song S., Cho Y., Shin D., Eo Y.-J., Jeong I., Ahn S.K., Cho A., Kim J., Yoon S., Choi P.-P., Jo W., Kim J.H., Gwak J., Yun J.H., A simple and robust route toward flexible CIGS photovoltaic devices on polymer substrates: Atomic level microstructural analysis and local opto-electronic investigation, Solar Energy Materials and Solar Cells, 195 (2019) 280-290.
Kim S.-H., Lee J.Y., Ahn J.-P., Choi P.-P., Fabrication of Atom Probe Tomography Specimens from Nanoparticles Using a Fusible Bi-In-Sn Alloy as an Embedding Medium, Microscopy and Microanalysis, 25 (2019) 438-446.
Kim T.-H., Ouyang G., Poplawsky J.D., Kramer M.J., Levitas V.I., Cui J., Zhou L., In-situ TEM analysis of the phase transformation mechanism of a Cu–Al–Ni shape memory alloy, Journal of Alloys and Compounds, 808 (2019).
Kirchheim R., Changing the interfacial composition of carbide precipitates in metals and its effect on hydrogen trapping, Scripta Materialia, 160 (2019) 62-65.
Kitayama T., Kozuka M., Aruga Y., Ichihara C., A Precise Method for Analysis of Elemental Distribution Inside Solute Clusters, Microscopy and Microanalysis, 25 (2019) 349-355.
Klein T., Hofer C., Lukas M., Wojcik T., Schnitzer R., Galler M., Ressel G., Formation of “carbide-free zones” resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation, Materialia, 7 (2019).
Kobayashi Y., Takahashi J., Kawakami K., Effects of dislocations on the early stage of TiC precipitation kinetics in ferritic steel: A comparative study with and without a pre-deformation, Acta Materialia, 176 (2019) 145-154.
Kontis P., Kostka A., Raabe D., Gault B., Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy, Acta Materialia, 166 (2019) 158-167.
Kouzminov D., Cournoyer J., Norasetthekul S., Muthuraman H., Gao Q., Quantitative Aspects of PLAD Sidewall Doping Characterization by SIMS and APT, Microscopy and Microanalysis, 25 (2019) 511-516.
Kovarik L., Devaraj A., Lavender C., Joshi V., Crystallographic and compositional analysis of impurity phase U 2 MoSi 2 C in UMo alloys, Journal of Nuclear Materials, 519 (2019) 287-291.
Kuhbach M., Breen A., Herbig M., Gault B., Building a Library of Simulated Atom Probe Data for Different Crystal Structures and Tip Orientations Using TAPSim, Microscopy and Microanalysis, 25 (2019) 320-330.
Kumar A., Agarwal G., Petrov R., Goto S., Sietsma J., Herbig M., Microstructural evolution of white and brown etching layers in pearlitic rail steels, Acta Materialia, 171 (2019) 48-64.
Kumar A., Makineni S.K., Dutta A., Goulas C., Steenbergen M., Petrov R.H., Sietsma J., Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications, Materials Science and Engineering A, 759 (2019) 210-223.
Kumar A., Saxena A.K., Kirchlechner C., Herbig M., Brinkmann S., Petrov R.H., Sietsma J., In situ study on fracture behaviour of white etching layers formed on rails, Acta Materialia, 180 (2019) 60-72.
Kuo J.J., Yu Y., Kang S.D., Cojocaru-Mirédin O., Wuttig M., Snyder G.J., Mg Deficiency in Grain Boundaries of n-Type Mg3Sb2 Identified by Atom Probe Tomography, Advanced Materials Interfaces, 6 (2019).
Kwiatkowski da Silva A., Kamachali R.D., Ponge D., Gault B., Neugebauer J., Raabe D., Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions, Acta Materialia, 168 (2019) 109-120.
Lähnemann J., Hill M.O., Herranz J., Marquardt O., Gao G., Al Hassan A., Davtyan A., Hruszkewycz S.O., Holt M.V., Huang C., Calvo-Almazán I., Jahn U., Pietsch U., Lauhon L.J., Geelhaar L., Correlated nanoscale analysis of the emission from wurtzite versus zincblende (In,Ga)As/GaAs nanowire core-shell quantum wells, Nano Letters, 19 (2019) 4448-4457.
Lamm S., Matschkal D., Göken M., Felfer P., Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys, Materials Science and Engineering A, 761 (2019).
"Larson, D.J. and Moody, M.P., Modeling and simulation in atom probe tomography, Materials Characterization, 149 (2019) 248.
Lawitzki R., Hassan S., Karge L., Wagner J., Wang D., von Kobylinski J., Krempaszky C., Hofmann M., Gilles R., Schmitz G., Differentiation of γ′- and γ″- precipitates in Inconel 718 by a complementary study with small-angle neutron scattering and analytical microscopy, Acta Materialia, 163 (2019) 28-39."
Lee J., Choe J., Park J., Yu J.-H., Kim S., Jung I.D., Sung H., Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions, Materials Characterization, 155 (2019).
Lee K.R., Riley B.J., Park H.-S., Choi J.-H., Han S.Y., Hur J.-M., Peterson J.A., Zhu Z., Schreiber D.K., Kruska K., Olszta M.J., Investigation of physical and chemical properties for upgraded SAP (SiO 2 –Al 2 O 3 –P 2 O 5 ) waste form to immobilize radioactive waste salt, Journal of Nuclear Materials, 515 (2019) 382-391.
Lee S., Kang S.-H., Nam J.-H., Lee S.-M., Seol J.-B., Lee Y.-K., Effect of Tempering on the Microstructure and Tensile Properties of a Martensitic Medium-Mn Lightweight Steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 2655-2664.
Lei Q., Li S., Zhu J., Xiao Z., Zhang F., Li Z., Microstructural evolution, phase transition, and physics properties of a high strength Cu–Ni–Si–Al alloy, Materials Characterization, 147 (2019) 315-323.
Lewis J.B., Floss C., Isheim D., Daulton T.L., Seidman D.N., Ogliore R., Origins of meteoritic nanodiamonds investigated by coordinated atom-probe tomography and transmission electron microscopy studies, Meteoritics and Planetary Science, (2019).
Li H., Song H., Liu W., Precipitation of η-Ni3(Ti, Al) Phase at Grain Boundaries in an Austenitic Precipitation-Strengthened Stainless Steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 915-923.
Li H., Song H., Liu W., The coarsening behavior of γ′-Ni 3 (Ti, Al) phase in a precipitation strengthened Fe-based alloy, Materials Characterization, 151 (2019) 390-395.
Li H., Wong M.S., Khoury M., Bonef B., Zhang H., Chow Y., Li P., Kearns J., Taylor A.A., De Mierry P., Hassan Z., Nakamura S., Denbaars S.P., Study of efficient semipolar (11-22) InGaN green micro-light-emitting diodes on high-quality (11-22) GaN/sapphire template, Optics Express, 27 (2019) 24154-24160.
Li J., An Z., Hage F.S., Wang H., Xie P., Jin S., Ramasse Q.M., Sha G., Solute clustering and precipitation in an Al–Cu–Mg–Ag–Si model alloy, Materials Science and Engineering A, 760 (2019) 366-376.
Li J., Huang G., Mi X., Peng L., Xie H., Kang Y., Effect of Ni/Si mass ratio and thermomechanical treatment on the microstructure and properties of Cu-Ni-Si alloys, Materials, 12 (2019).
Li J., Huang G., Mi X., Peng L., Xie H., Kang Y., Microstructure evolution and properties of a quaternary Cu–Ni–Co–Si alloy with high strength and conductivity, Materials Science and Engineering A, 766 (2019).
Li J., Huang G., Mi X., Peng L., Xie H., Kang Y., Relationship between the microstructure and properties of a peak aged Cu–Ni–Co–Si alloy, Materials Science and Technology (United Kingdom), 35 (2019) 606-614.
Li L., Li Z., Kwiatkowski da Silva A., Peng Z., Zhao H., Gault B., Raabe D., Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy, Acta Materialia, 178 (2019) 1-9.
Li S., Wang T., Tan Q., Li R., Wang Y., Wang X., Ren Y., Wang Y., A brittle fracture mechanism in thermally aged duplex stainless steels revealed by in situ high-energy X-ray diffraction, Materials Science and Engineering A, 739 (2019) 264-271.
Li T., Lai M., Kostka A., Salomon S., Zhang S., Somsen C., Dargusch M.S., Kent D., Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys, Scripta Materialia, 170 (2019) 183-188.
Li T., Shen J., Wu L., Song Z., Lv S., Cai D., Zhang S., Guo T., Song S., Zhu M., Atomic-Scale Observation of Carbon Distribution in High-Performance Carbon-Doped Ge2Sb2Te5 and Its Influence on Crystallization Behavior, Journal of Physical Chemistry C, 123 (2019) 13377-13384.
Li T., Xie Y., Wang X., Shen Q., Li J., Guo H., Xu J., Liu W., Mn promotes the rate of nucleation and growth of precipitates by increasing Frenkel pairs in Fe-Cu based alloys, RSC Advances, 9 (2019) 19620-19629.
Li T., Xiong X.-Y., Shen Q., Wang X.-J., Li J.-B., Wen-Qing L., Effect of Ni addition on precipitation strengthening of Cu-rich precipitates in Fe-Cu-Mn alloy, Materials Research Express, 6 (2019).
Li X., Wagner J.N., Stark A., Koos R., Landesberger M., Hofmann M., Fan G., Gan W., Petry W., Carbon redistribution process in austempered ductile iron (ADI) during heat treatment–APT and synchrotron diffraction study, Metals, 9 (2019).
Li Y., Wang J., Han E.-H., Wu W., Hänninen H., Multi-scale study of ductility-dip cracking in nickel-based alloy dissimilar metal weld, Journal of Materials Science and Technology, 35 (2019) 545-559.
"Li Z., Chai F., Yang C., Yang L., Co-precipitation mechanism of nanoscale particles and mechanical properties in multicomponent ultra-high strength low carbon steel, Materials Science and Engineering A, 748 (2019) 128-136.
Li, Z., Shi, Z.-Z., Hao, Y., Li, H.-F., Liu, X.-F., Volinsky, A.A., Zhang, H.-J., and Wang, L.-N., High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents, Journal of Materials Science and Technology, 35 (2019) 2618-2624"
Li Z., Zhao P., Jia Z., Liu Z., Xie Z., Effects of Mg and Si contents on the microstructure and mechanical properties of AA6014 alloys in T4P and T6P temper, Materials Science and Engineering A, 740-741 (2019) 187-200.
Liang X., Li Q., Huang J., Yao M.-Y., Li H., Liu Q.-D., Atom Probe Tomography Study of Fe Segregation at Phase Interface in Zr–2.5Nb Alloy, Acta Metallurgica Sinica (English Letters), 32 (2019) 1281-1286.
Licata O.G., Mazumder B., Application of Atom Probe Tomography for Advancing GaN Based Technology, International Journal of High Speed Electronics and Systems, 28 (2019).
Lin J.D., Seidman D.N., Dunand D.C., Improving coarsening resistance of dilute Al-Sc-Zr-Si alloys with Sr or Zn additions, Materials Science and Engineering A, 754 (2019) 447-456.
Lin X., Peng Q., Han E.-H., Ke W., Effect of Annealing on Microstructure of Thermally Aged 308L Stainless SteelWeld Metal, Jinshu Xuebao/Acta Metallurgica Sinica, 55 (2019) 555-565.
Lin X., Peng Q., Han E.-H., Ke W., Jiao Z., Irradiation-induced precipitation and inverse coarsening of G-phase in austenitic stainless steel weld metal, Materials Characterization, 151 (2019) 396-403.
Liu H., Fu P., Liu H., Sun C., Du N., Li D., Effect of vanadium micro-alloying on the microstructure evolution and mechanical properties of 718H pre-hardened mold steel, Journal of Materials Science and Technology, 35 (2019) 2526-2536.
Liu H., Li Q., Xu B., Liu W., Shu G., The effect of dislocations on MnNi-rich clusters in self-ion irradiated FeMnNi alloy, Journal of Nuclear Materials, 519 (2019) 64-73.
Liu H., Wang X., Cui W., Li Q., Xu B., Liu W., Shu G., The effect of dislocations on irradiation-induced vacancy-like defects in FeCu alloy and reactor pressure vessel steel, Journal of Nuclear Materials, 524 (2019) 80-89.
Liu L., Cui X.-Y., Jiang J.-T., Zhang B., Nomoto K., Zhen L., Ringer S.P., Segregation of the major alloying elements to Al3(Sc,Zr) precipitates in an Al–Zn–Mg–Cu–Sc–Zr alloy, Materials Characterization, 157 (2019).
Liu X., Sha G., Wu Q., Liang Y., Huang J., Jin K., Xue Y., Wang B., Wang L., Wang L., Wang F., Fan Q., Xia Z., Phase stability of an high-entropy Al-Cr-Fe-Ni-V alloy with exceptional mechanical properties: First-principles and APT investigations, Computational Materials Science, 170 (2019).
Liu X., Xu M., Shi Q., Kang J., Procario J., Hou W., Manohar M., Analysis of niobium-rich phases in the submerged arc welds of high strength low alloy steel, Materialia, 7 (2019).
Lloyd M.J., Abernethy R.G., Armstrong D.E.J., Bagot P.A.J., Moody M.P., Martinez E., Nguyen-Manh D., Radiation-induced segregation in W-Re: from kinetic Monte Carlo simulations to atom probe tomography experiments, European Physical Journal B, 92 (2019).
Lloyd M.J., Abernethy R.G., Gilbert M.R., Griffiths I., Bagot P.A.J., Nguyen-Manh D., Moody M.P., Armstrong D.E.J., Decoration of voids with rhenium and osmium transmutation products in neutron irradiated single crystal tungsten, Scripta Materialia, 173 (2019) 96-100.
London A.J., Quantifying Uncertainty from Mass-Peak Overlaps in Atom Probe Microscopy, Microscopy and Microanalysis, 25 (2019) 378-388.
Lu Q., Eizadjou M., Wang J., Ceguerra A., Ringer S., Zhan H., Wang L., Lai Q., Medium-Mn Martensitic Steel Ductilized by Baking, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 4067-4074.
Luo T., Girardeaux C., Bracht H., Mangelinck D., Role of the slow diffusion species in the dewetting of compounds: The case of NiSi on a Si isotope multilayer studied by atom probe tomography, Acta Materialia, 165 (2019) 192-202.
Lv Y., Ding Z., Sun X., Li L., Sha G., Liu R., Wang L., Gradient microstructures and mechanical properties of Ti-6Al-4V/Zn composite prepared by friction stir processing, Materials, 12 (2019).
Maeshima T., Oh-ishi K., Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting, Heliyon, 5 (2019).
Mantri S.A., Choudhuri D., Behera A., Hendrickson M., Alam T., Banerjee R., Role of isothermal omega phase precipitation on the mechanical behavior of a Ti-Mo-Al-Nb alloy, Materials Science and Engineering A, 767 (2019).
Manzoni A.M., Glatzel U., New multiphase compositionally complex alloys driven by the high entropy alloy approach, Materials Characterization, 147 (2019) 512-532.
Manzoni A.M., Haas S., Yu J.M., Daoud H.M., Glatzel U., Aboulfadl H., Mücklich F., Duran R., Schmitz G., Többens D.M., Matsumura S., Vogel F., Wanderka N., Evolution of γ/γ' phases, their misfit and volume fractions in Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy, Materials Characterization, 154 (2019) 363-376.
Mao Z., Booth-Morrison C., Sudbrack C.K., Noebe R.D., Seidman D.N., Interfacial free energies, nucleation, and precipitate morphologies in Ni-Al-Cr alloys: Calculations and atom-probe tomographic experiments, Acta Materialia, 166 (2019) 702-714.
Martin A.J., Yatzor B., Examining the Effect of Evaporation Field on Boron Measurements in SiGe: Insights into Improving the Relationship between APT and SIMS Measurements of Boron, Microscopy and Microanalysis, (2019).
Marvel C.J., Hornbuckle B.C., Darling K.A., Harmer M.P., Intentional and unintentional elemental segregation to grain boundaries in a Ni-rich nanocrystalline alloy, Journal of Materials Science, 54 (2019) 3496-3508.
Massey C.P., Dryepondt S.N., Edmondson P.D., Frith M.G., Littrell K.C., Kini A., Gault B., Terrani K.A., Zinkle S.J., Multiscale investigations of nanoprecipitate nucleation, growth, and coarsening in annealed low-Cr oxide dispersion strengthened FeCrAl powder, Acta Materialia, 166 (2019) 1-17.
Massey C.P., Edmondson P.D., Field K.G., Hoelzer D.T., Dryepondt S.N., Terrani K.A., Zinkle S.J., Post irradiation examination of nanoprecipitate stability and α′ precipitation in an oxide dispersion strengthened Fe-12Cr-5Al alloy, Scripta Materialia, 162 (2019) 94-98.
Massey C.P., Hoelzer D.T., Edmondson P.D., Kini A., Gault B., Terrani K.A., Zinkle S.J., Stability of a model Fe-14Cr nanostructured ferritic alloy after long-term thermal creep, Scripta Materialia, 170 (2019) 134-139.
Massey C.P., Hoelzer D.T., Seibert R.L., Edmondson P.D., Kini A., Gault B., Terrani K.A., Zinkle S.J., Microstructural evaluation of a Fe-12Cr nanostructured ferritic alloy designed for impurity sequestration, Journal of Nuclear Materials, 522 (2019) 111-122.
Mazumder B., Sarker J., Zhang Y., Johnson J.M., Zhu M., Rajan S., Hwang J., Atomic scale investigation of chemical heterogeneity in β-(AlxGa1-x)2O3 films using atom probe tomography, Applied Physics Letters, 115 (2019).
Medvedev A.E., Murashkin M.Y., Enikeev N.A., Bikmukhametov I., Valiev R.Z., Hodgson P.D., Lapovok R., Effect of the eutectic Al-(Ce,La) phase morphology on microstructure, mechanical properties, electrical conductivity and heat resistance of Al-4.5(Ce,La) alloy after SPD and subsequent annealing, Journal of Alloys and Compounds, 796 (2019) 321-330.
Mianroodi J.R., Shanthraj P., Kontis P., Cormier J., Gault B., Svendsen B., Raabe D., Atomistic phase field chemomechanical modeling of dislocation-solute-precipitate interaction in Ni–Al–Co, Acta Materialia, 175 (2019) 250-261.
Michi R.A., De Luca A., Seidman D.N., Dunand D.C., Effects of Si and Fe micro-additions on the aging response of a dilute Al-0.08Zr-0.08Hf-0.045Er at.% alloy, Materials Characterization, 147 (2019) 72-83.
Michi R.A., Perrin Toinin J., Farkoosh A.R., Seidman D.N., Dunand D.C., Effects of Zn and Cr additions on precipitation and creep behavior of a dilute Al–Zr–Er–Si alloy, Acta Materialia, 181 (2019) 249-261.
Michi R.A., Toinin J.P., Seidman D.N., Dunand D.C., Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy, Materials Science and Engineering A, 759 (2019) 78-89.
Mo N., McCarroll I., Tan Q., Ceguerra A., Liu Y., Cairney J., Dieringa H., Huang Y., Jiang B., Pan F., Bermingham M., Zhang M.-X., Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy, Acta Materialia, 181 (2019) 185-199.
Mohanty S.K., Tolochko O., An atom probe analysis of self-assembled monolayers: A novel approach to investigate mixed and unmixed self-assembled monolayers (SAMs) on gold, Applied Surface Science, 494 (2019) 152-161.
Montalvo S.D., Reddy S.M., Saxey D.W., Rickard W.D.A., Fougerouse D., Quadir Z., Johnson T.E., Nanoscale constraints on the shock-induced transformation of zircon to reidite, Chemical Geology, 507 (2019) 85-95.
Moon J., Park S.-J., Kim S.-D., Jang J.H., Lee T.-H., Lee C.-H., Lee B.H., Hong H.-U., Han H.N., Phase transformation mechanism and hardness during ageing of an austenitic Fe-30Mn-10.5Al-1.1C-3Mo lightweight steel, Journal of Alloys and Compounds, 804 (2019) 511-520.
Morris R.J.H., Cuduvally R., Melkonyan D., Zhao M., van der Heide P., Vandervorst W., Atom probe of GaN/AlGaN heterostructures: The role of electric field, sample crystallography and laser excitation on quantification, Ultramicroscopy, 206 (2019).
Moser D.E., Arcuri G.A., Reinhard D.A., White L.F., Darling J.R., Barker I.R., Larson D.J., Irving A.J., McCubbin F.M., Tait K.T., Roszjar J., Wittmann A., Davis C., Decline of giant impacts on Mars by 4.48 billion years ago and an early opportunity for habitability, Nature Geoscience, 12 (2019) 522-527.
Mouton I., Breen A.J., Wang S., Chang Y., Szczepaniak A., Kontis P., Stephenson L.T., Raabe D., Herbig M., Britton T.B., Gault B., Quantification Challenges for Atom Probe Tomography of Hydrogen and Deuterium in Zircaloy-4, Microscopy and Microanalysis, 25 (2019) 481-488.
Mouton I., Katnagallu S., Makineni S.K., Cojocaru-Mirédin O., Schwarz T., Stephenson L.T., Raabe D., Gault B., Calibration of Atom Probe Tomography Reconstructions Through Correlation with Electron Micrographs, Microscopy and Microanalysis, 25 (2019) 301-308.
Nechaev Y.S., Öchsner A., On the physics of anomalies of boron nanosegregation at dislocations in FeAl, Defect and Diffusion Forum, 391 (2019) 246-250.
Nishimura C., Haneji Y., Tsuji H., Gotoh Y., Observation of DC field-evaporated ion species extracted from transition metal nitride thin film deposited on tungsten-tip, Surface and Interface Analysis, 51 (2019) 61-64.
Niu M., Zhou G., Wang W., Shahzad M.B., Shan Y., Yang K., Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel, Acta Materialia, 179 (2019) 296-307.
Nomoto K., Sugimoto H., Cui X.-Y., Ceguerra A.V., Fujii M., Ringer S.P., Distribution of boron and phosphorus and roles of co-doping in colloidal silicon nanocrystals, Acta Materialia, 178 (2019) 186-193.
Ohnuma T., Surface Diffusion of Fe and Cu on Fe (001) under Electric Field Using First-Principles Calculations, Microscopy and Microanalysis, 25 (2019) 547-553.
Okle P., Lin J.D., Zhu T., Dunand D.C., Seidman D.N., Effect of micro-additions of Ge, In or Sn on precipitation in dilute Al-Sc-Zr alloys, Materials Science and Engineering A, 739 (2019) 427-436.
Oomae H., Shinoda M., Asubar J.T., Sato K., Toyota H., Mayama N., Mehdiyev B., Uchitomi N., Spatial distribution of substitutional Mn-As clusters in ferromagnetic (Zn,Sn,Mn)As 2 thin films revealed by image reconstruction of atom probe tomography data, Journal of Applied Physics, 125 (2019).
Oono N.H., Ukai S., Tominaga K., Ebisawa N., Tomura K., Precipitation of various oxides in ODS ferritic steels, Journal of Materials Science, 54 (2019) 8786-8799.
Palanisamy D., Raabe D., Gault B., On the compositional partitioning during phase transformation in a binary ferromagnetic MnAl alloy, Acta Materialia, 174 (2019) 227-236.
Pan D., Zhao Y., Xu X., Wang Y., Jiang W., Chong X., A novel strengthening and toughening strategy for T250 maraging steel: Cluster-orientation governed higher strength-ductility combination induced by electropulsing, Materials and Design, 169 (2019).
Pandey P., Makineni S.K., Gault B., Chattopadhyay K., On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition, Acta Materialia, 170 (2019) 205-217.
Pandey P., Makineni S.K., Samanta A., Sharma A., Das S.M., Nithin B., Srivastava C., Singh A.K., Raabe D., Gault B., Chattopadhyay K., Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure, Acta Materialia, 163 (2019) 140-153.
Pandey P., Sawant A.K., Nithin B., Peng Z., Makineni S.K., Gault B., Chattopadhyay K., On the effect of Re addition on microstructural evolution of a CoNi-based superalloy, Acta Materialia, 168 (2019) 37-51.
"Panitz J.A., My Life with Erwin: The Beginning of an Atom-Probe Legacy, Microscopy and Microanalysis, 25 (2019) 274-279.
"
"Park G., Kim K., Uhm S., Lee C., Remarkable improvement in resistance spot weldability of medium-Mn TRIP steel by paint-baking heat treatment, Materials Science and Engineering A, 766 (2019).
Park W.J., Kim J.E., Lee H.J., Park C.G., Heo J., Atom Probe Tomographic Imaging of PbS Quantum Dot Formation on Neodymium Clusters in Silicate Glasses, Scientific Reports, 9 (2019)."
Pedrazzini S., Rowlands B.S., Turk A., Parr I.M.D., Hardy M.C., Bagot P.A.J., Moody M.P., Galindo-Nava E., Stone H.J., Partitioning of Ti and Kinetic Growth Predictions on the Thermally Grown Chromia Scale of a Polycrystalline Nickel-Based Superalloy, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 3024-3029.
Peng Z., Lu Y., Hatzoglou C., Kwiatkowski Da Silva A., Vurpillot F., Ponge D., Raabe D., Gault B., An Automated Computational Approach for Complete In-Plane Compositional Interface Analysis by Atom Probe Tomography, Microscopy and Microanalysis, 25 (2019) 389-400.
Peng Z., Zanuttini D., Gervais B., Jacquet E., Blum I., Choi P.-P., Raabe D., Vurpillot F., Gault B., Unraveling the Metastability of Cn 2+ (n = 2-4) Clusters, Journal of Physical Chemistry Letters, 10 (2019) 581-588.
Peterman E.M., Reddy S.M., Saxey D.W., Fougerouse D., Snoeyenbos D.R., Rickard W.D.A., Nanoscale processes of trace element mobility in metamorphosed zircon, Contributions to Mineralogy and Petrology, 174 (2019).
Petit T., Besson J., Ritter C., Colas K., Helfen L., Morgeneyer T.F., Effect of hardening on toughness captured by stress-based damage nucleation in 6061 aluminum alloy, Acta Materialia, 180 (2019) 349-365.
Plotnikov E.Y., Mao Z., Baik S.-I., Yildirim M., Li Y., Cecchetti D., Noebe R.D., Martin G., Seidman D.N., A correlative four-dimensional study of phase-separation at the subnanoscale to nanoscale of a Ni–Al alloy, Acta Materialia, 171 (2019) 306-333.
Portavoce A., Hoummada K., Chow L., Coupling Secondary Ion Mass Spectrometry and Atom Probe Tomography for Atomic Diffusion and Segregation Measurements, Microscopy and Microanalysis, 25 (2019) 517-523.
Povstugar I., Weber J., Naumenko D., Huang T., Klinkenberg M., Quadakkers W.J., Correlative atom probe tomography and transmission electron microscopy analysis of grain boundaries in thermally grown alumina scale, Microscopy and Microanalysis, 25 (2019) 11-20.
Prosa T.J., Strennen S., Olson D., Lawrence D., Larson D.J., A Study of Parameters Affecting Atom Probe Tomography Specimen Survivability, Microscopy and Microanalysis, 25 (2019) 425-437.
Proudian A.P., Jaskot M.B., Diercks D.R., Gorman B.P., Zimmerman J.D., Atom Probe Tomography of Molecular Organic Materials: Sub-Dalton Nanometer-Scale Quantification, Chemistry of Materials, 31 (2019) 2241-2247.
Qu J., Chen H., Khan M., Yun F., Cui X., Ringer S.P., Cairney J.M., Zheng R., Quantitative Determination of How Growth Conditions Affect the 3D Composition of InGaAs Nanowires, Microscopy and Microanalysis, 25 (2019) 524-531.
Quiambao K.F., McDonnell S.J., Schreiber D.K., Gerard A.Y., Freedy K.M., Lu P., Saal J.E., Frankel G.S., Scully J.R., Passivation of a corrosion resistant high entropy alloy in non-oxidizing sulfate solutions, Acta Materialia, 164 (2019) 362-376.
Raghuwanshi M., Vilalta-Clemente A., Castro C., Duguay S., Cadel E., Jackson P., Hariskos D., Witte W., Pareige P., Influence of RbF post deposition treatment on heterojunction and grain boundaries in high efficient (21.1%) Cu(In,Ga)Se 2 solar cells, Nano Energy, 60 (2019) 103-110.
Railsback J., Choi S.H., Barnett S.A., Effectiveness of dense Gd-doped ceria barrier layers for (La,Sr)(Co,Fe)O 3 cathodes on Yttria-stabilized zirconia electrolytes, Solid State Ionics, 335 (2019) 74-81.
Reyes Tirado F.L., Taylor S., Dunand D.C., Effect of Al, Ti and Cr additions on the γ-γ’ microstructure of W-free Co-Ta-V-Based superalloys, Acta Materialia, 172 (2019) 44-54.
Roesgaard S., Talbot E., Hatzoglou C., Hansen J.L., Julsgaard B., Structural characterization of tin nanocrystals embedded in silicon by atomic probe tomography, Materials Research Express, 6 (2019).
Rogozhkin S.V., Iskandarov N.A., Nikitin A.A., Bogachev A.A., Khomich A.A., Khoroshilov V.V., Lukyanchuk A.A., Raznitsyn O.A., Shutov A.S., Fedin P.A., Kulevoy T.V., Leontyeva-Smirnova M.V., Mozhanov E.M., Effect of Low-Temperature Ion Irradiation on the Nanostructure of 12% Chromium ChS-139 Steel, Inorganic Materials: Applied Research, 10 (2019) 1078-1084.
Rogozhkin S.V., Nikitin A.A., Khomich A.A., Iskandarov N.A., Khoroshilov V.V., Bogachev A.A., Lukyanchuk A.A., Raznitsyn O.A., Shutov A.S., Kulevoy T.V., Fedin P.A., Vasiliev A.L., Presnyakov M.Y., Study of Microscopic Origins of Radiation Hardening of Eurofer 97 in Simulation Experiment with Ion Irradiation, Inorganic Materials: Applied Research, 10 (2019) 333-338.
Rogozhkin S.V., Nikitin A.A., Khomich A.A., Lukyanchuk A.A., Raznitsyn O.A., Shutov A.S., Fedin P.A., Kulevoy T.V., Vasiliev A.L., Presnyakov M.Y., Möslang A., Lindau R., Vladimirov P., The influence of Fe-ion irradiation on the microstructure of reduced activation ferritic-martensitic steel Eurofer 97, Nuclear Fusion, 59 (2019).
Ryabov V.V., Khlusova E.I., Zisman A.A., Rogozhkin S.V., Nikitin A.A., Luk’yanchuk A.A., Quantitative Analysis of Carbide Phases in Medium-Carbon Steel After Low-Temperature Tempering, Metallurgist, 62 (2019) 926-936.
Saint-Antonin F., Lefebvre W., Blum I., Niobium base superalloys: Achievement of a coherent ordered precipitate structure in the Nb solid-solution, Crystals, 9 (2019).
Sandlöbes S., Korte-Kerzel S., Raabe D., On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys, Materials Science and Engineering A, 748 (2019) 301-312.
Sasaki T.T., Takada Y., Okazaki H., Ohkubo T., Nakamura T., Sato T., Kato A., Kaneko Y., Hono K., Role of Ga on the high coercivity of Nd-rich Ga-doped Nd-Fe-B sintered magnet, Journal of Alloys and Compounds, 790 (2019) 750-759.
Sauvage X., Duchaussoy A., Zaher G., Strain induced segregations in severely deformed materials, Materials Transactions, 60 (2019) 1151-1158.
Sauza D.J., Dunand D.C., Noebe R.D., Seidman D.N., γ’-(L12) precipitate evolution during isothermal aging of a Co–Al–W–Ni superalloy, Acta Materialia, 164 (2019) 654-662.
Sauza D.J., Dunand D.C., Seidman D.N., Microstructural evolution and high-temperature strength of a γ(f.c.c.)/γ’(L12) Co–Al–W–Ti–B superalloy, Acta Materialia, 174 (2019) 427-438.
Sawada H., Maruyama N., Tabata S., Kawakami K., Dependence of carbon concentration and alloying elements on the stability of iron carbides, ISIJ International, 59 (2019) 1128-1135.
Sayed I., Bonef B., Liu W., Chan S., Georgieva J., Speck J.S., Keller S., Mishra U.K., Electrical properties and interface abruptness of AlSiO gate dielectric grown on 000 1 ̄ N-polar and (0001) Ga-polar GaN, Applied Physics Letters, 115 (2019).
Schmidt J.E., Ye X., van Ravenhorst I.K., Oord R., Shapiro D.A., Yu Y.-S., Bare S.R., Meirer F., Poplawsky J.D., Weckhuysen B.M., Probing the Location and Speciation of Elements in Zeolites with Correlated Atom Probe Tomography and Scanning Transmission X-Ray Microscopy, ChemCatChem, 11 (2019) 488-494.
Schönfeld B., Sax C.R., Zemp J., Engelke M., Boesecke P., Kresse T., Boll T., Al-Kassab T., Peil O.E., Ruban A.V., Local order in Cr-Fe-Co-Ni: Experiment and electronic structure calculations, Physical Review B, 99 (2019).
Schwarz T., Redinger A., Siebentritt S., Peng Z., Gault B., Raabe D., Choi P.-P., Variable chemical decoration of extended defects in Cu-poor C u2ZnSnS e4 thin films, Physical Review Materials, 3 (2019).
Seol J.B., Kwak C.M., Han J.C., Baek K.H., Jeong Y.K., Correlative transmission electron microscopy and atom probe tomography on field evaporation mechanism of a bulk LaAlO 3 oxide, Applied Surface Science, 479 (2019) 828-834.
Sepehri-Amin H., Dirba I., Tang X., Ohkubo T., Schrefl T., Gutfleisch O., Hono K., Development of high coercivity anisotropic Nd-Fe-B/Fe nanocomposite powder using hydrogenation disproportionation desorption recombination process, Acta Materialia, 175 (2019) 276-285.
Seydoux-Guillaume A.-M., Fougerouse D., Laurent A.T., Gardés E., Reddy S.M., Saxey D.W., Nanoscale resetting of the Th/Pb system in an isotopically-closed monazite grain: A combined atom probe and transmission electron microscopy study, Geoscience Frontiers, 10 (2019) 65-76.
Seyed Mousavi G., Langelier B., McDermid J.R., Effect of Sn Addition, Process Atmosphere pO 2 , and Annealing Time on the Selective Oxidation of a C-2Mn-1.7Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, (2019).
Shen J., Lv S., Chen X., Li T., Zhang S., Song Z., Zhu M., Thermal Barrier Phase Change Memory, ACS Applied Materials and Interfaces, 11 (2019) 5336-5343.
Shen Z., Tweddle D., Lapington M.T., Jenkins B., Du D., Zhang L., Moody M.P., Lozano-Perez S., Observation of internal oxidation in a 20% cold-worked Fe-17Cr-12Ni stainless steel through high-resolution characterization, Scripta Materialia, 173 (2019) 144-148.
Shinde D., Fritze S., Thuvander M., Malinovskis P., Riekehr L., Jansson U., Stiller K., Elemental Distribution in CrNbTaTiW-C High Entropy Alloy Thin Films, Microscopy and Microanalysis, 25 (2019) 489-500.
Shinde D., Thuvander M., Rehan A., Ejnermark S., Stiller K., Improving Compositional Accuracy in APT Analysis of Carbides Using a Decreased Detection Efficiency, Microscopy and Microanalysis, 25 (2019) 454-461.
Shower P., Morris J., Shin D., Radhakrishnan B., Poplawsky J., Shyam A., Mechanisms for stabilizing θ′(Al 2 Cu)precipitates at elevated temperatures investigated with phase field modeling, Materialia, 6 (2019).
Shu S., Wells P.B., Odette G.R., Morgan D., A kinetic lattice Monte Carlo study of post-irradiation annealing of model reactor pressure vessel steels, Journal of Nuclear Materials, 524 (2019) 312-322.
Song C., Yu H., Lu J., Zhou T., Modeling of Bainite Transformation During Partitioning Process and Atomic-Scale Characterization of Bainite, Steel Research International, 90 (2019).
Soni P., Raghuwanshi M., Wuerz R., Berghoff B., Knoch J., Raabe D., Cojocaru-Mirédin O., Role of elemental intermixing at the In 2 S 3 /CIGSe heterojunction deposited using reactive RF magnetron sputtering, Solar Energy Materials and Solar Cells, 195 (2019) 367-375.
Soni P., Raghuwanshi M., Wuerz R., Berghoff B., Knoch J., Raabe D., Cojocaru-Mirédin O., Sputtering as a viable route for In2S3 buffer layer deposition in high efficiency Cu(In,Ga)Se2 solar cells, Energy Science and Engineering, 7 (2019) 478-487.
Souza Filho I.R., Kwiatkowski da Silva A., Sandim M.J.R., Ponge D., Gault B., Sandim H.R.Z., Raabe D., Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation, Acta Materialia, 166 (2019) 178-191.
Sridharan N., Chen Y., Nandwana P., Ulfig R.M., Larson D.J., Babu S.S., On the potential mechanisms of β to α′ + β decomposition in two phase titanium alloys during additive manufacturing: a combined transmission Kikuchi diffraction and 3D atom probe study, Journal of Materials Science, (2019).
Sridharan N., Poplawsky J., Vivek A., Bhattacharya A., Guo W., Meyer H., Mao Y., Lee T., Daehn G., Cascading microstructures in aluminum-steel interfaces created by impact welding, Materials Characterization, 151 (2019) 119-128.
Stein H.S., Zhang S., Li Y., Scheu C., Ludwig A., Photocurrent Recombination through Surface Segregation in Al-Cr-Fe-O Photocathodes, Zeitschrift fur Physikalische Chemie, (2019).
Stevens M.A., Grossklaus K.A., McElearney J.H., Vandervelde T.E., Impact of Rotation Rate on Bismuth Saturation in GaAsBi Grown by Molecular Beam Epitaxy, Journal of Electronic Materials, 48 (2019)3376-3382.
Sundell G., Hulander M., Pihl A., Andersson M., Atom Probe Tomography for 3D Structural and Chemical Analysis of Individual Proteins, Small, 15 (2019).
Suwanpreecha C., Toinin J.P., Pandee P., Dunand D.C., Limmaneevichitr C., Isothermal aging of Al-Ni-Sc alloy containing Al3Ni microfibers and Al3Sc nanoprecipitates, Journal of Metals, Materials and Minerals, 29 (2019) 37-41.
Takahashi J., Kawakami K., Kawasaki K., Study on complex precipitation kinetics in Cr- and Cu-added nitriding steels by atom probe tomography, Acta Materialia, 169 (2019) 88-98.
Takahashi J., Kawakami K., Kobayashi Y., Application of atom probe tomography to fundamental issues of steel materials, Surface and Interface Analysis, 51 (2019) 12-16.
Tan X., Ponge D., Lu W., Xu Y., Yang X., Rao X., Wu D., Raabe D., Carbon and strain partitioning in a quenched and partitioned steel containing ferrite, Acta Materialia, 165 (2019) 561-576.
Tang F., Zhu T., Fu W.-Y., Oehler F., Zhang S., Griffiths J.T., Humphreys C., Martin T.L., Bagot P.A.J., Moody M.P., Patra S.K., Schulz S., Dawson P., Church S., Jacobs J., Oliver R.A., Insight into the impact of atomic- and nano-scale indium distributions on the optical properties of InGaN/GaN quantum well structures grown on m -plane freestanding GaN substrates, Journal of Applied Physics, 125 (2019).
Taniguchi M., Nishikawa O., Alternate field evaporation by changing laser pulsing and voltage pulsing dynamically for atom probe analysis, Surface and Interface Analysis, 51 (2019) 105-109.
Tao B., Luan B., Qiu R., Fang Q., Cao L., Liu Y., Zhang X., Liu R., Liu Q., Analysis of atomic distribution near grain boundary in Zr–Sn–Nb–Fe-(Cu) alloys by atom probe tomography, Journal of Nuclear Materials, 515 (2019) 135-139.
Taylor S.D., Liu J., Zhang X., Arey B.W., Kovarik L., Schreiber D.K., Perea D.E., Rosso K.M., Visualizing the iron atom exchange front in the Fe(II)-catalyzed recrystallization of goethite by atom probe tomography, Proceedings of the National Academy of Sciences of the United States of America, 116 (2019) 2866-2874.
Theska F., Ceguerra A.V., Turk C., Breen A.J., Ringer S.P., Primig S., Correlative study of lattice imperfections in long-range ordered, nano-scale domains in a Fe-Co-Mo alloy, Ultramicroscopy, 204 (2019) 91-100.
Theska F., Ringer S.P., Primig S., Atom Probe Microscopy of Strengthening Effects in Alloy 718, Microscopy and Microanalysis, 25 (2019) 470-480.
Thuvander M., Andersson M., Stiller K., Multiple influences of molybdenum on the precipitation process in a martensitic PH stainless steel, Metals, 9 (2019).
Tian J., Wang W., Li H., Shahzad M.B., Shan Y., Jiang Z., Yang K., Effect of deformation on precipitation hardening behavior of a maraging steel in the aging process, Materials Characterization, 155 (2019) -.
Tissot O., Pareige C., Mathon M.-H., Roussel M., Meslin E., Décamps B., Henry J., Comparison between SANS and APT measurements in a thermally aged Fe-19 at.%Cr alloy, Materials Characterization, 151 (2019) 332-341.
Tkadletz M., Hofer C., Wüstefeld C., Schalk N., Motylenko M., Rafaja D., Holzschuh H., Bürgin W., Sartory B., Mitterer C., Czettl C., Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition, Acta Materialia, 174 (2019) 195-205.
Tsuchiya E., Matsumura Y., Hosoya Y., Miyamoto Y., Kobayashi T., Seto K., Tomura K., Inoue K., Nagai Y., Development of niobium bearing high carbon steel sheet for knitting needles, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 105 (2019) 76-85.
Tu W., Tang J., Zhang Y., Cao L., Ma L., Zhu Q., Ye L., Liu S., Influence of Sn on the precipitation and hardening response of natural aged Al-0.4Mg-1.0Si alloy artificial aged at different temperatures, Materials Science and Engineering A, 765 (2019).
Tuinukuafe A., Kaub T., Weiss C.A., Jr, Allison P.G., Thompson G.B., Amirkhanian A., Atom probe tomography of an alkali activated fly ash concrete, Cement and Concrete Research, 121 (2019) 37-41.
Tweddle D., Hamer P., Shen Z., Markevich V.P., Moody M.P., Wilshaw P.R., Direct observation of hydrogen at defects in multicrystalline silicon, Progress in Photovoltaics: Research and Applications, (2019).
Tweddle D., Hamer P., Shen Z., Moody M.P., Wilshaw P.R., Identification of colloidal silica polishing induced contamination in silicon, Materials Characterization, 152 (2019) 239-244.
Umemura T., Ymaguchi Y., Kurokawa S., Method combining scanning tunneling microscopy and atom probe tomography for observing inside of materials, Japanese Journal of Applied Physics, 58 (2019).
Usami S., Mayama N., Toda K., Tanaka A., Deki M., Nitta S., Honda Y., Amano H., Direct evidence of Mg diffusion through threading mixed dislocations in GaN p-n diodes and its effect on reverse leakage current, Applied Physics Letters, 114 (2019).
Ushioda K., Takata K., Takahashi J., Kinoshita K., Sawada H., Changes in states of carbon and mechanical properties with aging at 50°C after quenching in low carbon steel, Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 83 (2019) 353-362.
Vaidya A., Sarker J., Zhang Y., Lubecki L., Wallace J., Poplawsky J.D., Sasaki K., Kuramata A., Goyal A., Gardella J.A., Mazumder B., Singisetti U., Structural, band and electrical characterization of β-(Al0.19Ga0.81)2O3 films grown by molecular beam epitaxy on Sn doped β-Ga2O3 substrate, Journal of Applied Physics, 126 (2019).
Vayyala A., Povstugar I., Galiullin T., Naumenko D., Quadakkers W.J., Hattendorf H., Mayer J., Effect of Nb Addition on Oxidation Mechanisms of High Cr Ferritic Steel in Ar–H2–H2O, Oxidation of Metals, 92 (2019) 471-491.
Verberne R., Saxey D.W., Reddy S.M., Rickard W.D.A., Fougerouse D., Clark C., Analysis of Natural Rutile (TiO2) by Laser-assisted Atom Probe Tomography, Microscopy and Microanalysis, 25 (2019) 539-546.
Vivas J., De-Castro D., Poplawsky J.D., San-Martín D., Capdevila C., Direct observation of creep strengthening nanoprecipitate formation in ausformed ferritic/martensitic steels, Scripta Materialia, 164 (2019) 76-81.
Vogel F., Ngai S., Smith C.J., Holler R., Weinberger C.R., Wanderka N., Thompson G.B., Carbide and nitride phase characterization in a transition metal carbo-nitride using x-ray spectroscopy and atom probe tomography, Micron, 122 (2019) 32-40.
Vurpillot F., Hatzoglou C., Radiguet B., Da Costa G., Delaroche F., Danoix F., Enhancing Element Identification by Expectation-Maximization Method in Atom Probe Tomography, Microscopy and Microanalysis, 25 (2019) 367-377.
Wang D.W., Zhou Y.H., Shen J., Liu Y., Li D.F., Zhou Q., Sha G., Xu P., Ebel T., Yan M., Selective laser melting under the reactive atmosphere: A convenient and efficient approach to fabricate ultrahigh strength commercially pure titanium without sacrificing ductility, Materials Science and Engineering A, 762 (2019).
Wang H.H., Tong Z., Wang J., Hodgson P.D., Timokhina I., Study of Nb non-equilibrium segregation at prior austenite grain boundary in welding using atom probe tomography and modeling, Journal of Materials Science, 54 (2019) 11320-11327.
Wang J., Ramajayam M., Charrault E., Stanford N., Quantification of precipitate hardening of twin nucleation and growth in Mg and Mg-5Zn using micro-pillar compression, Acta Materialia, 163 (2019) 68-77.
Wang J., Schreiber D.K., Bailey N., Hosemann P., Toloczko M.B., The Application of the OPTICS Algorithm to Cluster Analysis in Atom Probe Tomography Data, Microscopy and Microanalysis, 25 (2019) 338-348.
Wang J., Weyland M., Bikmukhametov I., Miller M.K., Hodgson P.D., Timokhina I., Transformation from cluster to nano-precipitate in microalloyed ferritic steel, Scripta Materialia, 160 (2019) 53-57.
Wang L., Xie L., Shen P., Fan Q., Wang W., Wang K., Lu W., Hua L., Zhang L.-C., Surface microstructure and mechanical properties of Ti-6Al-4V/Ag nanocomposite prepared by FSP, Materials Characterization, 153 (2019) 175-183.
Wang W., Xu G., Liu S., Interface characteristics and solute segregation behavior on CLAM steel, Materials Research Express, 6 (2019).
Wang X.-M., Li G.-A., Jiang J.-T., Shao W.-Z., Zhen L., Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys, Materials Science and Engineering A, 742 (2019) 138-149.
Wang Y., Hu S., Li Y., Cheng G., Improved hydrogen embrittlement resistance after quenching–tempering treatment for a Cr-Mo-V high strength steel, International Journal of Hydrogen Energy, 44 (2019) 29017-29026.
Wang Y., Jiang D., Yu W., Huang S., Wu D., Xu Y., Yang X., Short-range ordering in a commercial Ni-Cr-Al-Fe precision resistance alloy, Materials and Design, 181 (2019).
Wang Y., Xing Z., Qiao Y., Jiang H., Yu X., Ye F., Li Y., Wang L., Liu B., Asymmetric atomic diffusion and phase growth at the Al/Ni and Ni/Al interfaces in the Al-Ni multilayers obtained by magnetron deposition, Journal of Alloys and Compounds, 789 (2019) 887-893.
Weng Y., Ding L., Zhang Z., Jia Z., Wen B., Liu Y., Muraishi S., Li Y., Liu Q., Effect of Ag addition on the precipitation evolution and interfacial segregation for Al–Mg–Si alloy, Acta Materialia, 180 (2019) 301-316.
White L.F., Moser D.E., Tait K.T., Langelier B., Barker I., Darling J.R., Crystallization and impact history of a meteoritic sample of early lunar crust (NWA 3163) refined by atom probe geochronology, Geoscience Frontiers, 10 (2019) 1841-1848.
Wu M., Li Z., Gault B., Munroe P., Baker I., The effects of carbon on the phase stability and mechanical properties of heat-treated FeNiMnCrAl high entropy alloys, Materials Science and Engineering A, 748 (2019) 59-73.
Wu Y.-F., Fougerouse D., Evans K., Reddy S.M., Saxey D.W., Guagliardo P., Li J.-W., Gold, arsenic, and copper zoning in pyrite: A record of fluid chemistry and growth kinetics, Geology, 47 (2019) 641-644.
Xia Y., Hole accumulation effect on Laser-assisted field evaporation of insulators, Ultramicroscopy, 196 (2019) 121-128.
Xiao Y., Maier-Kiener V., Michler J., Spolenak R., Wheeler J.M., Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests, Materials and Design, 181 (2019).
Xie Z.J., Langelier B., Tsai Y.T., Shang C.J., Yang J.R., Subramanian S.V., Ma X.P., Wang X.L., Characterization of nano-sized precipitation and dislocations and the correlation with mechanical properties of a low alloy TRIP-aided steel, Materials Science and Engineering A, 763 (2019).
Xu S.S., Zhao Y., Chen D., Sun L.W., Chen L., Tong X., Liu C.T., Zhang Z.W., Nanoscale precipitation and its influence on strengthening mechanisms in an ultra-high strength low-carbon steel, International Journal of Plasticity, 113 (2019) 99-110.
Xu X.D., Sepehri-Amin H., Sasaki T.T., Soderžnik M., Tang X., Ohkubo T., Hono K., Comparison of coercivity and squareness in hot-deformed and sintered magnets produced from a Nd-Fe-B-Cu-Ga alloy, Scripta Materialia, 160 (2019) 9-14.
Xue J., Jin S., An X., Liao X., Li J., Sha G., Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion, Journal of Materials Science and Technology, 35 (2019) 858-864.
Yan F., Mouton I., Stephenson L.T., Breen A.J., Chang Y., Ponge D., Raabe D., Gault B., Atomic-scale investigation of hydrogen distribution in a Ti–Mo alloy, Scripta Materialia, 162 (2019) 321-325.
Yang M., Zhu J., Yang T., Luan J., Jiao Z., Fan X., Kuhn B., Xiong X., Wang C., Liu C.T., Liu X., A novel ferritic steel family hardened by intermetallic compound G-phase, Materials Science and Engineering A, 745 (2019) 390-399.
Yang Q., Danaie M., Young N., Broadley V., Joyce D.E., Martin T.L., Marceau E., Moody M.P., Bagot P.A.J., Atom probe tomography of Au-Cu bimetallic nanoparticles synthesized by inert gas condensation, Journal of Physical Chemistry C, (2019).
Yang T., Zhao Y.L., Luan J.H., Han B., Wei J., Kai J.J., Liu C.T., Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy, Scripta Materialia, 164 (2019) 30-35.
Yi J., Jia Y., Zhao Y., Xiao Z., He K., Wang Q., Wang M., Li Z., Precipitation behavior of Cu-3.0Ni-0.72Si alloy, Acta Materialia, 166 (2019) 261-270.
Yin D., Murdoch H.A., Chad Hornbuckle B., Hernández-Rivera E., Dunstan M.K., Investigation of anomalous copper hydride phase during magnetic field-assisted electrodeposition of copper, Electrochemistry Communications, 98 (2019) 96-100.
Yoo B., Im H.J., Seol J.-B., Choi P.-P., On the microstructural evolution and partitioning behavior of L12-structured γ′-based Co-Ti-W alloys upon Cr and Al alloying, Intermetallics, 104 (2019) 97-102.
Yu L.-J., Marquis E.A., Precipitation behavior of Alloy 625 and Alloy 625 plus, Journal of Alloys and Compounds, 811 (2019).
Yu X.-X., Gulec A., Cwalina K.L., Scully J.R., Marks L.D., New insights on the role of chloride during the onset of local corrosion: TEM, APT, surface energy, and morphological instability, Corrosion, 75 (2019) 616-627.
Yu Z., Couet A., Bachhav M., Irradiation-induced Nb redistribution of ZrNb alloy: An APT study, Journal of Nuclear Materials, 516 (2019) 100-110.
Yuan C.C., Lv Z.W., Pang C.M., Wu X.L., Lan S., Lu C.Y., Wang L.G., Yu H.B., Luan J.H., Zhu W.W., Zhang G.L., Liu Q., Wang X.-L., Shen B.L., Atomic-scale heterogeneity in large-plasticity Cu-doped metallic glasses, Journal of Alloys and Compounds, 798 (2019) 517-522.
Yue Q., Liu L., Yang W., Huang T., Zhang J., Fu H., Stress dependence of dislocation networks in elevated temperature creep of a Ni-based single crystal superalloy, Materials Science and Engineering A, 742 (2019) 132-137.
Zhang J., Hu T., Yi D., Wang H., Wang B., Double-shell structure of Al 3 (Zr,Sc)precipitate induced by thermomechanical treatment of Al–Zr–Sc alloy cable, Journal of Rare Earths, 37 (2019) 668-672.
Zhang L., Huang Z., Jiang L., Luan J., Jiao Z., Liu C.T., Effect of Mo:W ratio on segregation behavior and creep strength of nickel-based single crystal superalloys, Materials Science and Engineering A, 744 (2019) 481-489.
Zhang L., Radiguet B., Todeschini P., Domain C., Shen Y., Pareige P., Investigation of solute segregation behavior using a correlative EBSD/TKD/APT methodology in a 16MND5 weld, Journal of Nuclear Materials, 523 (2019) 434-443.
Zhang Y., Gu Y., Zheng W., Chen P., Zheng Y., Zhang Y., Shao X., Li X., Gong H., Anomalous arsenic diffusion at InGaAs/InP interface, Materials Research Express, 6 (2019).
Zhang Y., Jin S., Trimby P., Liao X., Murashkin M.Y., Valiev R.Z., Sha G., Strengthening mechanisms in an ultrafine-grained Al[sbnd]Zn[sbnd]Mg[sbnd]Cu alloy processed by high pressure torsion at different temperatures, Materials Science and Engineering A, 752 (2019) 223-232.
Zhang Y., Jin S., Trimby P.W., Liao X., Murashkin M.Y., Valiev R.Z., Liu J., Cairney J.M., Ringer S.P., Sha G., Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion, Acta Materialia, 162 (2019) 19-32.
Zhang Y., Liu M.-P., Qin X., Chen J., Wang S.-N., Research progress on microstructure of age-hardenable 6000 series aluminum alloys processed by severe plastic deformation , Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 40 (2019) 1-10.
Zhang Y., Miyamoto G., Furuhara T., Atom Probe Compositional Analysis of Interphase Precipitated Nano-Sized Alloy Carbide in Multiple Microalloyed Low-Carbon Steels, Microscopy and Microanalysis, 25 (2019) 447-453.
Zheng C., Reese E.R., Field K.G., Marquis E., Maloy S.A., Kaoumi D., Microstructure response of ferritic/martensitic steel HT9 after neutron irradiation: effect of dose, Journal of Nuclear Materials, 523 (2019) 421-433.
Zhou D., Wang H., Saxey D.W., Muránsky O., Geng H., Rickard W.D.A., Quadir Z., Yang C., Reddy S.M., Zhang D., Hall–Petch Slope in Ultrafine Grained Al-Mg Alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (2019) 4047-4057.
Zhou L., White E., Ke L., Cullen D.A., Lu P., Constantinides S., McCallum R.W., Anderson I.E., Kramer M.J., Microstructure and coercivity in alnico 9, Journal of Magnetism and Magnetic Materials, 471 (2019) 142-147.
Zhou X., Thompson G.B., Charge-State Field Evaporation Behavior in Cu(V) Nanocrystalline Alloys, Microscopy and Microanalysis, 25 (2019) 501-510.
Zhou X., Thompson G.B., The influence of alloying interactions on thin film growth stresses, Applied Surface Science, 463 (2019) 545-555.
Zhu M., Miyamoto G., Furuhara T., Surface hardening and precipitation behaviors in plasma-nitrided Fe-(2-x) at%Al-x at%Ti alloys, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 105 (2019) 202-211.
Zhu M., Song W., Konze P.M., Li T., Gault B., Chen X., Shen J., Lv S., Song Z., Wuttig M., Dronskowski R., Direct atomic insight into the role of dopants in phase-change materials, Nature Communications, 10 (2019).
Zhu Q., Cao L., Wu X., Zou Y., Couper M.J., Effect of Ag on age-hardening response of Al-Zn-Mg-Cu alloys, Materials Science and Engineering A, 754 (2019) 265-268.
Zhu Y., Sun K., Garves J., Bland L.G., Locke J., Allison J., Frankel G.S., Micro- and nano-scale intermetallic phases in AA2070-T8 and their corrosion behavior, Electrochimica Acta, 319 (2019) 634-648.
Zou Y., Xu Y.B., Han D.T., Hu Z.P., Misra R.D.K., Cao L.F., Song H., Combined contribution of Cu-rich precipitates and retained austenite on mechanical properties of a novel low-carbon medium-Mn steel plate, Journal of Materials Science, 54 (2019) 3438-3454.
Zschiesche H., Campos A.P.C., Dominici C., Roussel L., Charai A., Mangelinck D., Alfonso C., Correlated TKD/EDS - TEM - APT analysis on selected interfaces of CoSi2 thin films, Ultramicroscopy, 206 (2019).
Zschiesche H., Charaï A., Mangelinck D., Alfonso C., Ti segregation at CoSi2 grain boundaries, Microelectronic Engineering, 203-204 (2019) 1-5.
